Hi folks. I've been working on improving my cold starting through analyzing datalogs and have a couple of questions for clarity:
1. What is the definitioin of a "cycle" and what period of time is this? For example, if I set my after start enrichment for 300 cycles, how long will this last in seconds such that I can track it in the datalogs?
2. In the datalog, are the values for afterstart enrichment and Warmup Wizard cumulative? The columns Gwarm and Gammae look to be cumulative, but I'm not positive.
3. In the datalog, what is the column titled "engine" capturing? Most of the time mine just stays pegged at "1" but sometimes shortly after start up it will spike a bit. What information is this capturing?
Datalog terminology questioins
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Datalog terminology questioins
1. One cycle = 2 crankshaft revolutions on a 4 stroke motor.
2. Yes.
3. It's a bit by bit status of the engine.
2. Yes.
3. It's a bit by bit status of the engine.
Re: Datalog terminology questioins
Thanks guys, this is exactly what I needed.