I have a Haltech F7 Thermistor for IAT and CLT sensors. here are the measurements I get in the three temps.
34.70K ohm at 3 deg C
35.97K ohm at 25 deg C
36.50K ohm at 45 deg C
How can I get this sensor to work with MSII? I cant get a straight reading from it. Do I need to change the bias resistor? I have MSII, can I just change the bias resistor value in the program??
They seem like very tight resistance values to work with.
Any info would help lots -Liam
Haltech F7 sensors for MS??
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Haltech F7 sensors for MS??
Those sound like a weird set of PTC sensors. The MS is not designed to work with these.
-
elturbonitroso
- MegaSquirt Newbie
- Posts: 15
- Joined: Thu Jan 05, 2006 7:26 pm
- Location: CONNECTICUT
Re: Haltech F7 sensors for MS??
haltech used gm sensors.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Haltech F7 sensors for MS??
Yeah, that's usually the case. What gets me is these sensors don't appear to match the GM curve at all.elturbonitroso wrote:haltech used gm sensors.
Re: Haltech F7 sensors for MS??
yeh and I bought the kit from DIYAutoTune.com
If I knew i couldnt use my haltech sensors I would have chucked them in on the order too.
Oh well I can use some commodore ones from here in AUS. I got the coolant one working today. It reads great.
Just some feedback for DIYAutoTune.com..............Great, all great, well set out packages goes in well with the instructions set out on the megamanual. Well done guys.
-Liam
I am now running my megasquirt on my Datsun 1200 coupe 1970 with quad throttlebodies off a YZF-R6 with Ford EDIS ign system and holden/GM sensors.
If I knew i couldnt use my haltech sensors I would have chucked them in on the order too.
Oh well I can use some commodore ones from here in AUS. I got the coolant one working today. It reads great.
Just some feedback for DIYAutoTune.com..............Great, all great, well set out packages goes in well with the instructions set out on the megamanual. Well done guys.
-Liam
I am now running my megasquirt on my Datsun 1200 coupe 1970 with quad throttlebodies off a YZF-R6 with Ford EDIS ign system and holden/GM sensors.
-
elturbonitroso
- MegaSquirt Newbie
- Posts: 15
- Joined: Thu Jan 05, 2006 7:26 pm
- Location: CONNECTICUT
Re: Haltech F7 sensors for MS??
diy are great with custumer satifaction and dude you can use the haltech sensor they are gm.
Re: Haltech F7 sensors for MS??
went out the other day and shelled out for some new GM sensors. They work great. all is going good now.