I have loaded the s19 firmware version 2.89 before the end of the load this error appears.
ERROR: Could not read status code, 0x3E 0x00
Elapsed time: 9.39 seconds
What am I missing. IS this normal or a true error.
Any help would be wonderful.
Thanks
Aaron
MSII 3.57 board 2.89 firm issue
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MSII 3.57 board 2.89 firm issue
It looks like a true error, but it would help if you could post the full text of the message from the download program.
Re: MSII 3.57 board 2.89 firm issue
Here are the error codes the second one is new.
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Aaron/Desktop/Monitor_v2.890.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db420
File read successfully.
Opened comm port 1 at 115200.
Erasing main FLASH:
Erased.
Writing:
Setting page register 0x3c:
Page set.
Erasing page 0x3c:
Erased.
Setting page register 0x3d:
Page set.
Erasing page 0x3d:
Erased.
Write complete, 1439 records, 46003 bytes.
Verifying:
Setting page register 0x00:
Page set.
ERROR: Could not read status code, 0x3E 0x00
Elapsed time: 9.39 seconds
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Aaron/Desktop/Monitor_v2.890.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db420
File read successfully.
Opened comm port 1 at 115200.
Erasing main FLASH:
ERROR: Command not recognized, e=0xE1
Elapsed time: 0.31 seconds
Any help would be wonderful
Aaron
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Aaron/Desktop/Monitor_v2.890.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db420
File read successfully.
Opened comm port 1 at 115200.
Erasing main FLASH:
Erased.
Writing:
Setting page register 0x3c:
Page set.
Erasing page 0x3c:
Erased.
Setting page register 0x3d:
Page set.
Erasing page 0x3d:
Erased.
Write complete, 1439 records, 46003 bytes.
Verifying:
Setting page register 0x00:
Page set.
ERROR: Could not read status code, 0x3E 0x00
Elapsed time: 9.39 seconds
MegaSquirt Download 2.00
Reading C:/Documents and Settings/Aaron/Desktop/Monitor_v2.890.abs.s19:
Detected MS-II (HCS12) code.
Entry point: 0x0000
Code range : 0x4000-0x3db420
File read successfully.
Opened comm port 1 at 115200.
Erasing main FLASH:
ERROR: Command not recognized, e=0xE1
Elapsed time: 0.31 seconds
Any help would be wonderful
Aaron
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MSII 3.57 board 2.89 firm issue
Doesn't look like it got all the way. Are you using a 9 volt battery? If so, make sure the voltage isn't too low; loading code is murder on 9 volt batteries.
Re: MSII 3.57 board 2.89 firm issue
I am using car battery key for a voltage source.
New DB9 cable and a fully chargered battery. Still same issues
When interfacing with Megatune and Tunerstudio, the connect is sporatic connected not connected.
Thanks
Aaron
New DB9 cable and a fully chargered battery. Still same issues
When interfacing with Megatune and Tunerstudio, the connect is sporatic connected not connected.
Thanks
Aaron
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MSII 3.57 board 2.89 firm issue
Are you using a direct serial connection or USB adapter?
Re: MSII 3.57 board 2.89 firm issue
I am using direct serial port. I ditched the laptoop and rolled the car next to a desktop, and damnit if it did not load.
Thanks now on to my next challenge.
Aaron
Thanks now on to my next challenge.
Aaron