need some suggestions

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
ford_devel_dog
MegaSquirt Newbie
Posts: 1
Joined: Mon Oct 26, 2009 4:35 am

need some suggestions

Post by ford_devel_dog »

i am new to MS, just ordered a 2.2 board, used of course, and will be here at the end of the week. I am putting this on a 4.6 all aluminum cobra engine. I am looking for suggested settings, and of course some guidance as i am new to this. I learn quickly, but again im new to this. so with that said suggest away
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: need some suggestions

Post by Matt Cramer »

We have some tips about MS on a Ford modular motor here:

http://www.DIYAutoTune.com/tech_article ... ustang.htm
Top
Post Reply

Return to “Tuning Fuel and Air”