expanded schematics - controller plus relay board??

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
dain176116
MegaSquirt Newbie
Posts: 1
Joined: Mon Nov 23, 2009 11:46 am

expanded schematics - controller plus relay board??

Post by dain176116 »

this schematic (v3ext_wiring.gif) in the manual is very good. however, it is controller to sensors, etc. Has anyone updated this diagram to include connections through the relay board? I am hoping someone has done this and will save the me the trouble to redo it. I love the diagram/schematic approach and have printed one with a plotter and is hanging on the wall. I'd like to see the relay board in it. Any help??

Thanks
8974Ollie
Helpful Squirter
Posts: 82
Joined: Tue Oct 13, 2009 4:35 pm

Re: expanded schematics - controller plus relay board??

Post by 8974Ollie »

Is this the schematics you are looking for?

http://www.megamanual.com/index.html

On left scroll down near bottom, look for Relay Board Information.
Post Reply