Hello I'm new here,
I am doing a restauration of my Mazda 323 GTX of 90' and I want to fit the Megasquirt on my baby.
I want to install Ford EDIS ignition system because it is going to give me the possibility for changing the timing. But this is a wasted-spark system. The question is how can I synchronize the inyection? this system doesn't know the engine in what stroke it is, how does megasquirt know when needs to do the fuel inyection?
I'm very sorry because my english is very poor, but i hope that you will understand my question.
Please if you think that any other ignition system is going to be better for me don't hesitate to tell me.
Thanks in advance!!!!!
How to synchronize Ford EDIS system with inyection
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Mikelkooler
- MegaSquirt Newbie
- Posts: 2
- Joined: Wed Dec 09, 2009 4:06 pm
Re: How to synchronize Ford EDIS system with inyection
Most injection systems, being indirect, fire all the injectors at once - or alternately in two banks. So for fuellling don't need to know which stroke each cylinder is on.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
-
Mikelkooler
- MegaSquirt Newbie
- Posts: 2
- Joined: Wed Dec 09, 2009 4:06 pm
Re: How to synchronize Ford EDIS system with inyection
Thanks for answering!!!
I didn't knew that. So when they fire all at once fuel is there "waiting" until valves open then goes inside the piston. So don't care in which point you are doing fueling???
I didn't knew that. So when they fire all at once fuel is there "waiting" until valves open then goes inside the piston. So don't care in which point you are doing fueling???
-
Darth Bimmer
- MegaSquirt Newbie
- Posts: 2
- Joined: Wed Dec 16, 2009 8:48 am
- Location: Montreal, Qc, Canada
Re: How to synchronize Ford EDIS system with inyection
Exactly!!!!Mikelkooler wrote:So when they fire all at once fuel is there "waiting" until valves open then goes inside the piston