I'm converting to use LS1 coils on my engine - I have management all wired up, and I thought I was prepped for the coil-plug wires, but none of the connectors for my custom length spark plug wire set work with the LS1 coils. So I just did some digging for LS1 spark plug wire sets, and they're all made-to-length. Some of my wires have to go around a bend to avoid the headers on my engine, so the factory LS1 length wires won't work, I need to make them. At this point I have 8mm wires on the spark plugs and routed up to the coils, I just have no way to connect them. I've searched for just the crimp-on connectors & boots for the coil packs, as well as ls1 wire sets that aren't pre-assembled, and I have had no luck in either search... Does anyone know of a vendor that sells either just the ends or whole unassembled LS1 sets?Custom length LS1 coil->plug wires?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
defiance
- MegaSquirt Newbie
- Posts: 4
- Joined: Thu Aug 12, 2004 6:48 pm
- Location: Little Rock, AR
- Contact:
Custom length LS1 coil->plug wires?
Yet another difficulty as I enter the home stretch of my rewire I'm converting to use LS1 coils on my engine - I have management all wired up, and I thought I was prepped for the coil-plug wires, but none of the connectors for my custom length spark plug wire set work with the LS1 coils. So I just did some digging for LS1 spark plug wire sets, and they're all made-to-length. Some of my wires have to go around a bend to avoid the headers on my engine, so the factory LS1 length wires won't work, I need to make them. At this point I have 8mm wires on the spark plugs and routed up to the coils, I just have no way to connect them. I've searched for just the crimp-on connectors & boots for the coil packs, as well as ls1 wire sets that aren't pre-assembled, and I have had no luck in either search... Does anyone know of a vendor that sells either just the ends or whole unassembled LS1 sets?
I'm converting to use LS1 coils on my engine - I have management all wired up, and I thought I was prepped for the coil-plug wires, but none of the connectors for my custom length spark plug wire set work with the LS1 coils. So I just did some digging for LS1 spark plug wire sets, and they're all made-to-length. Some of my wires have to go around a bend to avoid the headers on my engine, so the factory LS1 length wires won't work, I need to make them. At this point I have 8mm wires on the spark plugs and routed up to the coils, I just have no way to connect them. I've searched for just the crimp-on connectors & boots for the coil packs, as well as ls1 wire sets that aren't pre-assembled, and I have had no luck in either search... Does anyone know of a vendor that sells either just the ends or whole unassembled LS1 sets?The years-long project: viewtopic.php?t=3043
Other info (stereo, interior, etc):
http://www.sounddomain.com/ride/2324498
Other info (stereo, interior, etc):
http://www.sounddomain.com/ride/2324498
-
roarin_mouse
- MegaSquirt Newbie
- Posts: 9
- Joined: Fri May 30, 2008 8:31 am
- Location: Orlando, FL, GOOD OLE U.S.A.
Re: Custom length LS1 coil->plug wires?
Taylor has the LSx coil boots and terminals. I just ordered them from them a few days ago and am waiting for them to arrive. I think the total cost with shipping was around 15 bucks and they'll sell direct to you. They said thay Summit carries them but have no stock at the moment. I hope this helps you.
-
defiance
- MegaSquirt Newbie
- Posts: 4
- Joined: Thu Aug 12, 2004 6:48 pm
- Location: Little Rock, AR
- Contact:
Re: Custom length LS1 coil->plug wires?
Awesome! Yes, that's exactly what I needed. Many thanks!
The years-long project: viewtopic.php?t=3043
Other info (stereo, interior, etc):
http://www.sounddomain.com/ride/2324498
Other info (stereo, interior, etc):
http://www.sounddomain.com/ride/2324498