New Here!!!!Some questions.....

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
mpempas
MegaSquirt Newbie
Posts: 1
Joined: Sun Jan 10, 2010 4:42 am

New Here!!!!Some questions.....

Post by mpempas »

Hello there.

I am Jim and i am newbie here :P. I am form Greece and i have a BMW 318is M44 that i try to make it turbo ;-)

The managment i have to choose the MS.I find it very intrested..

But i have 2 questions.First do you know if there is any adaptor to connect to my stock wiring without cutting much cables???

And 2nd if there is any already map for my 318is to see and maybe use it with some developments...

Thnx so much and i am glad to answer me!!!!
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: New Here!!!!Some questions.....

Post by Matt Cramer »

Welcome! I've seen a couple BMW adapter designs floating around on eBay for the 88 pin Motronic connector, but I don't know if they will fit an M44 or not. The manual walks you through how to create your own base map if you can't find one.
Top
Post Reply

Return to “Wiring and Sensors”