Setup is a Hayabusa with a MSII + MSD MC4 with the intention of running 35psi.
We have a Map Dady 4 bar sensor and obviously the standard inbuilt one.
I am wondering what is the bet way to provide both the MSD ignition and the MSII with output from the 4 bar sensor and if possible also have real time barro correction on the MSII.
The MAP sensor input on the MSD is 3 wire.
Could I Mount the Map daddy externally and take the feed from sensor 1 to the MSII and sensor 2 to the MSD ?
Does anyone know if the output from the Mapdaddy would be compatible with the MSD ?
Are all 6 pins on the standard MSII sensor in use ?
MAP Sensor Questions
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MAP Sensor Questions
You could wire the second sensor on the MapDaddy to the MSD. It's unclear if it would interpret the output correctly, but it probably could use the output for something. You may have your boost pressure readings off.
Only the first three pins on the MAP sensor are connected - the data sheet warns not to connect the second three either to external circuitry or ground.
Only the first three pins on the MAP sensor are connected - the data sheet warns not to connect the second three either to external circuitry or ground.
Re: MAP Sensor Questions
Thanks Matt, I will grab the data sheet and take a look 