I'm looking at upgrading my board to control my GM HEI distributor and was told I need to connect a wire from the JP1-Pin 5 to the #36 PIN on the DB37 connector at the board.
Wanted to know if there was a nice, simple plug to use on the JP1 Pin 5 terminal instead of soldering a wire directly to it?
I saw on DIY Autotune's website they have a "mod kit" for the GM HEI but I don't believe it will work with my board considering the one they show in the video looks different than mine.
Attached is a picture of where I was told to attach the wire on the JP1 terminal.
Thanks for the help,
Adding ignition control to an MS-II in a MS-1 v2.2 board
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Adding ignition control to an MS-II in a MS-1 v2.2 board
You do not have the required permissions to view the files attached to this post.
Andrew Geeting
1987 Oldsmobile Cutlass Supreme
455/T-56/4.30 w/ MS EFI
MS-II in a MS-1 version 2.2 board - 2.891 code
1987 Oldsmobile Cutlass Supreme
455/T-56/4.30 w/ MS EFI
MS-II in a MS-1 version 2.2 board - 2.891 code
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Adding ignition control to an MS-II in a MS-1 v2.2 board
You need to use the JP1 header on the main board, not the header on the daughter card.
