Any MS savvy dyno shops or tuners in SF Bay Area?

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
grover
Helpful Squirter
Posts: 40
Joined: Tue May 22, 2007 11:14 am
Location: El Cerrito, CA

Any MS savvy dyno shops or tuners in SF Bay Area?

Post by grover »

I've got my car tuned about as well as I can, but there are still some rough spots that I can't seem to resolve. Also, I'd like to be able to hook my car up to a knock sensor of some sort. Does anybody know of a good for-hire MS tuner in the San Francisco Bay Area and/or a dyno shop that is well versed in MS applications? Thanks in advance.
Top
Jaan
MegaSquirt Newbie
Posts: 8
Joined: Sat Dec 08, 2007 1:55 am

Re: Any MS savvy dyno shops or tuners in SF Bay Area?

Post by Jaan »

You might try my shop in Berkeley.

I have MSQd two cars successfully, but if I'm here on the forums looking for answers I'm obviously not a full Hero just yet.

Jaan

http://www.eddinsmoto.com/
Top
Post Reply

Return to “Tuning Fuel and Air”