Gray VE tables in drop down menu

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Jaan
MegaSquirt Newbie
Posts: 8
Joined: Sat Dec 08, 2007 1:55 am

Gray VE tables in drop down menu

Post by Jaan »

Hi you guys.

just dialing in my tuning, & three days ago my VE tables became inaccessible in both tuner studio and MSII.

If I go to my other car, everything is still fine in MS1.

Go to MSII & no access. The dropdown menu has VE in gray instead of black.

Accel wizard, warmup wizard, & IAT menus still work.

I have tried everything I can think of. Any suggestions ?


Here's a link to my build:

http://www.eddinsmoto.com/id131.htm

Thanks !

Jaan
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Gray VE tables in drop down menu

Post by Matt Cramer »

Sounds like a settings conflict - please post a copy of your MSQ.
Top
Post Reply

Return to “Tuning Fuel and Air”