Here's my situation..
I bought and had a friend build a vs 2.2 mega squirt for me, but never used it due to the non iac motor control..
At the time I also bought the flyback damp board, and the mega view!!
I'm building a 92 Firebird, that I'm installing twin turbos on...
The easy approach of course would be to just buy a chip, but nothing for a V6 exist..
So I'm back to seeing if it's possible for me to use the Mega Squirt system I have, but never used..
Is it possible for my to piggy back this with my O.E. pcm??? that way my transmission still functions correctly
And if so, is there a circuit board to run an iac motor? or do I need to use an air valve??
version 2.2
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: version 2.2
You could put an MS2 daughter card on a V2.2 main board and get IAC control.
We have an article on how to get the MS and the stock ECU to play nicely together here:
http://www.DIYAutoTune.com/tech_article ... rallel.htm
We have an article on how to get the MS and the stock ECU to play nicely together here:
http://www.DIYAutoTune.com/tech_article ... rallel.htm
Re: version 2.2
AWESOME!!!!!!!!!
Thanks Matt..
I'd rather do this, then try to play with available prom chips for a hit and miss situation
Thanks Matt..
I'd rather do this, then try to play with available prom chips for a hit and miss situation