My car has been sitting for about 1.5 years. Upon firing it up the other day, I noticed the LC-1 was not working.
I whent through the steps for free air cal. and I did not get an E2 code. When the key is turned to the ON posistion, There are just three bars displayed on the gauge. When I push the button on the gauge, I will get a HI or LO but nothing else.
Keith
LC-1 not working
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
LC-1 not working
MS1 V3.0 MS&S Extra
Porsche 914 1.7
Porsche 914 1.7
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: LC-1 not working
Can it communicate with LogWorks?
Re: LC-1 not working
I'm not sure I even have that capability. I have the CD with the LC-1 manual. Is there a program in there that I can try to connect to?
MS1 V3.0 MS&S Extra
Porsche 914 1.7
Porsche 914 1.7
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: LC-1 not working
Yes, that would be LogWorks.toon1 wrote:I'm not sure I even have that capability. I have the CD with the LC-1 manual. Is there a program in there that I can try to connect to?
Re: LC-1 not working
OK, thanks Matt, I will check it out. Keith
MS1 V3.0 MS&S Extra
Porsche 914 1.7
Porsche 914 1.7