IAT place.

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
laminator
MegaSquirt Newbie
Posts: 2
Joined: Tue Nov 09, 2010 7:22 am

IAT place.

Post by laminator »

Hi, i am running a turbo engine, and i wold like to know, where is the best place to put the air intake temperature sensor, after or before throttle body, after, i mean into intake manifold, i supposed this is the correct place.

REGARDS!
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: IAT place.

Post by Matt Cramer »

Between the throttle body and the intercooler. Putting the IAT in the intake manifold is affected by the temperature of the manifold surface and can lead to a false hot reading at low air flow rates.
Top
laminator
MegaSquirt Newbie
Posts: 2
Joined: Tue Nov 09, 2010 7:22 am

Re: IAT place.

Post by laminator »

Thanks Matt!

:D
Top
Post Reply

Return to “Wiring and Sensors”