Ford TPS wiring

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
sebch
MegaSquirt Newbie
Posts: 9
Joined: Wed Oct 27, 2004 9:00 am
Location: Lausanne/Switzerland

Ford TPS wiring

Post by sebch »

Hi all,

Here is a question I asked back in 2005 for my first MS install. The answer lies somewhere on a toasted harddrive (Thank you S*** Corp).

So I'd need to know once again how I should wire my Ford TPS that has three wires and thus three pins (wow!) labelled A, B and C. The connector is sort of oval. It came off a late 90's Escort (European Market - zetec?).

I promise this time I'll write the answer down and store it on paper, plus save a copy on gmail :mrgreen:

Thanks in advance for your help. Best, Seb
Normal cars go to paradise, 2cv's go everywhere!
And old volvo's are forever...
sebch
MegaSquirt Newbie
Posts: 9
Joined: Wed Oct 27, 2004 9:00 am
Location: Lausanne/Switzerland

Re: Ford TPS wiring

Post by sebch »

OK, I just found this in the f****** manual :RTFM: :RTFM: . It should solve the case :oops:

This thread can be locked or deleted!
Normal cars go to paradise, 2cv's go everywhere!
And old volvo's are forever...
Post Reply