Ive been looking around at PWM IAC to "Retrofit" to my 22re.
What i'd like to know is if anyone has done this to their car, 22re or not. And which IAC they used
Im looking at something like this:
http://www.autosensorberlin.com/product ... 6457D.html
Thanks
Mitch
IAC setup
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: IAC setup
Ive done a bit more reading but cant see why to go PWM over Stepper. Is there any real difference?
Im using the DIYPnP ecu which comes with the outputs for a PWM, will they work for the Stepper iac as well?
Thanks
Im using the DIYPnP ecu which comes with the outputs for a PWM, will they work for the Stepper iac as well?
Thanks
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: IAC setup
The IAC shown in that link is NOT a stepper, despite what the guys who made that site say. 2 wire IACs are PWM. You would have to build a dedicated stepper circuit to run a stepper IAC.
