Hi all
I'm building a MSII that i bought from DITAutoTune.com.
I'm using a USB to serial adaptor but am having trouble talking to the MS with MegaTune. I was albe to load the s19 file no probs through this serial connection.
I am using a Belkin serial adaptor. with windows vista
I have run the portcheck program and it results with "No Connection Made". I have removed the buffer on the com port by unchecking "Use FIFO Buffers (....."
Are there any other things i can try???
Thanks in Advance
Jase
Serial Communication Testing
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Serial Communication Testing
What COM port do you have the Belkin adapter set to?
Re: Serial Communication Testing
com 3 which matches what the device manager says its plugged into
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Serial Communication Testing
Any chance you may still have the boot jumper on?
Re: Serial Communication Testing
no it is defiantly off
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Serial Communication Testing
Exactly what S19 file did you load?
Re: Serial Communication Testing
version 2.892 it seemed to load fine. which is why i don't understand why i can't talk to it with mega tune.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Serial Communication Testing
Could you please post a screen shot of what happens when you run Port Check?
Some older daughter cards had an odd quirk - they could go into bootloader mode if the ECU is powered on while plugged into certain serial adapters. Try powering up the MS2 without the serial connection plugged in, then plug in the serial port.
Some older daughter cards had an odd quirk - they could go into bootloader mode if the ECU is powered on while plugged into certain serial adapters. Try powering up the MS2 without the serial connection plugged in, then plug in the serial port.