I've looked all around the message boards and in the megamanual, but I seem to be getting different results in regards to what exactly the most recent firmware version is for MS2 v3. On this message board, it says 2.905, which agrees with here: http://www.megamanual.com/ms2/code.htm
But when I go to where the megamanual states: http://www.megamanual.com/files/ini/ the highest version is listed as 3.76. As far as I know, that isn't the MS2/Extra firmware, so what is it? Reading the first few lines of the .ini of both 2.905 and 3.760 show that they were edited in late July, which just adds to my confusion...
Newest firmware version?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: Newest firmware version?
nib,
2.905 is the latest for MS-II. 3.76 is beta code for Microsquirt and the Sequencer. It can't easily be loaded on an MS-II because MS-II don't have the right serial monitor to load the extended code page structure of the newer code (MS-II doesn't have the hardware to take advantage of most of the updates made in the 3.76 code anyhow).
Lance.
2.905 is the latest for MS-II. 3.76 is beta code for Microsquirt and the Sequencer. It can't easily be loaded on an MS-II because MS-II don't have the right serial monitor to load the extended code page structure of the newer code (MS-II doesn't have the hardware to take advantage of most of the updates made in the 3.76 code anyhow).
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
-
nibblet787
- MegaSquirt Newbie
- Posts: 8
- Joined: Wed Mar 16, 2011 9:53 am
Re: Newest firmware version?
Thanks, Lance! While we're on the subject, is there any section of these message boards, or anywhere else for that matter, that refers to the developments which use the 3.76+ firmware? It might be helpful to know, since I can keep in mind that the discussions there probably won't pertain to my application.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: Newest firmware version?
niblet,
At the moment, because this is beta code for Microsquirt and the sequencer, the discussion is here: http://www.microsquirt.com/viewforum.php?f=90
Lance.
At the moment, because this is beta code for Microsquirt and the sequencer, the discussion is here: http://www.microsquirt.com/viewforum.php?f=90
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw