If I use a 60-2 trigger wheel with an EDIS-8 on my 8 cylinder Cadillac 500 would I still use the 50 degree vr sensor/trigger wheel relationship and use the 15th tooth rather than the 5 teeth of the 36-1 set-up?
And which of the 2 missing teeth is the index?
From the Megamanual ;"EDIS-8: missing tooth is exactly five teeth (50°) ahead of the VR sensor"
And maybe the bigger question since I am not finding info relating the EDIS to a 60 tooth wheel, Does EDIS only work with a 36-1 wheel?
Thanks, Mark
EDIS 60-2 settings
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
EDIS 60-2 settings
500 cid Cadillac in an FJ40, MSII, 2.905,1000 cfm auto-nomics throttle body w/4 52#port injectors.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: EDIS 60-2 settings
floppy,
Yes, EDIS only works with a 36-1 wheel. The wheel is read by the module, not MegaSquirt, and appears as a regular distributor to the MegaSquirt controller (so no MegaSquirt settings will help with the 60-2).
Lance.
Yes, EDIS only works with a 36-1 wheel. The wheel is read by the module, not MegaSquirt, and appears as a regular distributor to the MegaSquirt controller (so no MegaSquirt settings will help with the 60-2).
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
Re: EDIS 60-2 settings
Thanks Lance!
Using Bruce"s DWG now to make a t-wheel that will work on my motor.
Mark
Using Bruce"s DWG now to make a t-wheel that will work on my motor.
Mark
500 cid Cadillac in an FJ40, MSII, 2.905,1000 cfm auto-nomics throttle body w/4 52#port injectors.