Step 41 MS-2 processor operation trouble

[david martin]

Hi,

I'm having trouble with step 41 in the Assembly guide ( http://www.megamanual.com/ms2/V3assemble.htm ). I do not see a "time" display in the left hand corner of the Realtime Display in Tuner Studio. I've browsed through the trouble shoot section with no luck. I'm using a power supply for the stim, not a battery. I've attached a screen shot. Every test up to this point has passed, Including the Communications Settings / Test Port. I'm not sure what other information I need to share, so please let me know.

Thanks

[kjones6039]

I do not see a "time" display in the left hand corner of the Realtime Display in Tuner Studio.

That would be correct. That is in MegaTune.... You will not see it in TunerStudio.

Ken

[david martin]

I do not see a "time" display in the left hand corner of the Realtime Display in Tuner Studio.

That would be correct. That is in MegaTune.... You will not see it in TunerStudio.

Ken

Thanks Ken! I feel relieved and stupid at the same time. The assembly guide up to now informed the reader when tuner studio differed from megatune.

Since I passed the communication / test port Is it safe to assume my processor is working correctly and move on?

Thank you!

[Bernard Fife]

David,

In TunerStudioMS, on the opening screen with the 8 gauges, right click on any of the gauges and select 'Clock' from the list of gauges. Then you should be able to see the clock count up by one second at a time.

I have fixed the documentation to account for this; thanks for bringing it up!

Lance.

[kjones6039]

David,

You are certainly welcome.

Since I passed the communication / test port Is it safe to assume my processor is working correctly and move on?

I would say so! Looks like you can proceed.

Good luck!

Ken

ps. Thanks as always, Lance!

[Bernard Fife]

Ken, David;

Thanks to you - and everyone who takes the time to look at the docs and ask/answer forum questions! I sincerely believe it is the best way to improve all aspects of MegaSquirt.

Lance.