Completely confused on Acceleration Wizard
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Completely confused on Acceleration Wizard
Hi guys. I've recently got my car back on the road again and am now sporting ITBs. I've spent the last couple of days getting it to be pretty well driveable, just focusing on the VE table, spark advance, etc... I'm now starting to look at tuning acceleration enrichment, have read the guidelines in the MegaManual, but remain completely confused on how to do this is in MegaTune. As far as I can tell, the pre-set values in my table aren't discussed in the MegaManual, and I'm feeling very uncertain as to how to proceed. I've attached my MSQ in addition to a datalog I took today with some moderate second gear pulls in it. From reviewing the datalog, it appears that I go very lean right at the first tip in of the throttle, so assuming acceleration enrichment could help here. Would appreciate any constructive advice. Thanks.
You do not have the required permissions to view the files attached to this post.
Re: Completely confused on Acceleration Wizard
Do yourself a favor and use TunerStudio. It's visual representations of AE are a big help.
95 Dakota, 5.2, 5 speed, 4x4, Holset H1C (Remote) 8PSI, MS2/Extra (fuel only), 42lb Bosch Design 3 Injectors, AEM UEGO.