Coolant temp sensor location

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Flatblackfanatic
MegaSquirt Newbie
Posts: 7
Joined: Sun Sep 11, 2011 4:35 pm

Coolant temp sensor location

Post by Flatblackfanatic »

Hi all! I have a air cooled parallel twin motorcycle that I am converting to efi.
I have most of the issues sorted out, just need some insight about locating my ECT sensor.
Since I have no coolant, would it make sense to install the ECT in an oil feed passage? or should i mount it to read cylinder head temp?
Top
Bernard Fife
Master Squirter
Posts: 475
Joined: Thu Oct 29, 2009 12:54 pm

Re: Coolant temp sensor location

Post by Bernard Fife »

Fbb,

Did you see this: http://www.megamanual.com/v22manual/mwire.htm#aircool ?

Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
Top
Post Reply

Return to “Wiring and Sensors”