hp and tq in MLV
Moderator: LT401Vette
hp and tq in MLV
Are the HP and Tq numbers in MLV corrected for elevation like a chassis dyno? And are these numbers supposed to be wheel Hp and Tq?
1978 Camaro Lt 383 L98 HSR Th350(for now) 3:42s
MSII v3 main board rev2.891 8-pin HEI MSD BlasterII
COMP CAMS XR276HR
TRICKFLOW 23° 2.02/1.6
Full roller valvetrain, 11.1:1 compression
MSII v3 main board rev2.891 8-pin HEI MSD BlasterII
COMP CAMS XR276HR
TRICKFLOW 23° 2.02/1.6
Full roller valvetrain, 11.1:1 compression
-
LT401Vette
- Master Squirter
- Posts: 481
- Joined: Sat Jul 16, 2005 7:07 am
- Location: Charlotte, NC
- Contact:
Re: hp and tq in MLV
Currently there are no corrections or drag losses applied. The values are purely base on the power required to accelerate the weight at the rate.
Phil Tobin
EFI Analytics, helping to simplify EFI with Next Generation tuning software.
http://www.tunerstudio.com/
http://www.efiAnalytics.com/MegaLogViewer/
Android Shadow Dash MS: http://tunerstudio.com/index.php/shadowdashmsmenu
EFI Analytics, helping to simplify EFI with Next Generation tuning software.
http://www.tunerstudio.com/
http://www.efiAnalytics.com/MegaLogViewer/
Android Shadow Dash MS: http://tunerstudio.com/index.php/shadowdashmsmenu