So I had a thread I while back but I can seem to find it
Olds 455 Edis 8 ms2
I originally tried to start the engine with the linchon coil on plugs wired in parallel, but I thing I destroyed the edis module
Then I bought another Edis set up off eBay and wired it all up with the factory coil packs
I have had it starting and running pretty smooth. So I thought Id try and wire the coil on plug in series sins I see the is a popular mod for the linchon mk7 guys
http://www.lincolnvscadillac.com/showthread.php?t=55050
But with it wired all correctly in series it will crank and sometimes fire but run rough and die. Or it will crank and show no tach signal in TS then totally disconnect from TS like I've lost power to turned the key off. If I turn the key off and on again it will reconnect
Any ideas
I'll post a vid soon
Edis 8 wired to coil on plugs
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Edis 8 wired to coil on plugs
92 zx7r ninja with 2007 gsxr TBs ms1 ver 2.2 fuel only
78 firebird olds 455 with holley 4d FI soon to be swapped to MS
78 firebird olds 455 with holley 4d FI soon to be swapped to MS
Re: Edis 8 wired to coil on plugs
92 zx7r ninja with 2007 gsxr TBs ms1 ver 2.2 fuel only
78 firebird olds 455 with holley 4d FI soon to be swapped to MS
78 firebird olds 455 with holley 4d FI soon to be swapped to MS
Re: Edis 8 wired to coil on plugs
The weird thing is the only thing that has changed from and easy starting
Smooth running engine is rewireing the factory coil packs to coil on
Smooth running engine is rewireing the factory coil packs to coil on
92 zx7r ninja with 2007 gsxr TBs ms1 ver 2.2 fuel only
78 firebird olds 455 with holley 4d FI soon to be swapped to MS
78 firebird olds 455 with holley 4d FI soon to be swapped to MS
Re: Edis 8 wired to coil on plugs
Hi Hessdawg - this is a73camaro. I apologize for smoking your EDIS module. The resistance of two coils in parallel didn't seem too different than the resistance of a single EDIS coil. I did some researching and found only one person who did multiple coils with an EDIS and they were wired in series.
It seems that posts that are a month old vanish away into some void. Bummer that this knowledge will become lost.
It seems that posts that are a month old vanish away into some void. Bummer that this knowledge will become lost.
Re: Edis 8 wired to coil on plugs
Hey 73
Yeah I think Parallel fried the edis but its cool, it's all part of hot rodding
The new edis was running great on the factory coil packs
Ive got the the COPs wired in series now. Each coil secondary resistance
Is 6,000 ohms so between to sister coils I get 12k resistance
The resistance of one of the plug wires i tested was 15k.
Any ideas??
Yeah I think Parallel fried the edis but its cool, it's all part of hot rodding
The new edis was running great on the factory coil packs
Ive got the the COPs wired in series now. Each coil secondary resistance
Is 6,000 ohms so between to sister coils I get 12k resistance
The resistance of one of the plug wires i tested was 15k.
Any ideas??
92 zx7r ninja with 2007 gsxr TBs ms1 ver 2.2 fuel only
78 firebird olds 455 with holley 4d FI soon to be swapped to MS
78 firebird olds 455 with holley 4d FI soon to be swapped to MS