I recently assembled a MSII (v3.0) and had everything working. Yesterday, I had the MSII on the bench when suddenly it quit working. When I plug in the Sim (v2.21) The IG led lights up solid, and the PMP light blinks. I put the MSII back in my car and it just cycles the Fuel Pump (just like the sim). If anyone has any suggestions as to what might have happened, I would really apprecaite it.
(The MSII was working in the car and on the bench just prior to this happening.. Had to reboot my PC and change battery on Sim, then when I pluged the Sim back in, the MSII started acting like stated above.)
fuel pump pulses
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: fuel pump pulses
What firmware are you running? This is usually a sign of a config error - in B&G code, that is normally setting the ECU type to an invalid number.
