motorcycle injection question using ms
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
motorcycle injection question using ms
ive been turbo charging bikes for almost a decade for fun in my garage. i always used a piggy back but the results were not to my satisfaction fo rthe work involved in turbocharging a bike. i currently have an 04 cbr 1000rr that ive been dying to turbocharge and use megasquirt or microsquirt to replace the limited stock ecm. the problem i noticed is that when i went to remove the airbox i noticed that the bike is setup from the factory with primary and secondary injectors. can megasquirt do anything with this setup or do i have to convert it to a normal 1 injector per cylinder system?
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: motorcycle injection question using ms
Yes, you can use dual table mode to have separate tables for primary and secondary injectors.
Re: motorcycle injection question using ms
Matt Cramer wrote:Yes, you can use dual table mode to have separate tables for primary and secondary injectors.
thats perfect! thanks a bunch. with this info i am definitely going to do it now. that was my biggest concern.....