ms2 injector prob
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
ms2 injector prob
Hey so I got my ms2 v3 board aysembled, and the harness together on my 78 280z. using the stock l28e, and tring to start it with fuel control only. i am getting a rpm signal in tunner studio from the - coil. it shows the pulse in tunerstudios, but is reading 21-22 afr from my lc1. the injector led is not flashing, and also nothing at the injectors them self. i dont know were to go next. uploaded a data log
You do not have the required permissions to view the files attached to this post.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: ms2 injector prob
Test the MS2 on a Stim; do the injector LEDs pulse on a Stim?
Re: ms2 injector prob
It was the extra flux that I didn't clean off. sorry, also noticed that I had set it for microsquirt and not ms2. 