need help with ms

The forum to discuss:
- V2.2, V3 assembly,
- V2.2, V3 troubleshooting, and
- Connection troubleshooting
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
240man91
MegaSquirt Newbie
Posts: 1
Joined: Fri Jun 28, 2013 12:22 am

need help with ms

Post by 240man91 »

ok first off I would like to say this is my first ms setup. I did not put it in the car I jus got the car today it is a 95 eclipse with the 420a. the guy said that it needs tuned. so first off how do I go about finding out what ms system I have? then where do I find the stuff to down load to my laptop to start tuning? I have always been with a Nissan 240sx witch I still am and have always rom tuned the ecu. never had to tune like this. I want to try it so here I am. any help would be nice thank you.
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: need help with ms

Post by Matt Cramer »

There is a list of pictures to help identify what MegaSquirt variant you have here:

http://www.msextra.com/doc/general/whatmegasquirt.html

You can download TunerStudio to connect to it and tune from tunerstudio.com.
trakkies
Super Squirter
Posts: 1162
Joined: Tue Dec 30, 2008 3:06 am
Location: SW London, UK

Re: need help with ms

Post by trakkies »

240man91 wrote:ok first off I would like to say this is my first ms setup. I did not put it in the car I jus got the car today it is a 95 eclipse with the 420a. the guy said that it needs tuned. so first off how do I go about finding out what ms system I have? then where do I find the stuff to down load to my laptop to start tuning? I have always been with a Nissan 240sx witch I still am and have always rom tuned the ecu. never had to tune like this. I want to try it so here I am. any help would be nice thank you.
At the top of this page under 'need help with MS' you'll see manual underlined. Click on that and start reading.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Post Reply