Connection problems using bluetooth

The forum to discuss:
- V2.2, V3 assembly,
- V2.2, V3 troubleshooting, and
- Connection troubleshooting
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
bmcewen
Helpful Squirter
Posts: 70
Joined: Tue Feb 22, 2011 3:17 pm
Location: northern colorado

Connection problems using bluetooth

Post by bmcewen »

I have been trying to use the Bluetooth dongle I bought from the efianalytics website but I am having issues staying connected. the connection drops and reconnects every minute or so. mI have not seen any trouble shooting sections for this anywhere. My setup works perfectly using usb. Any suggestions or links would be appreciated. Also the laptop sits in the passenger seat, the megasquirt is mounted under the dash on the other side of the plastic glove box door so there is only about 2 feet between them.
1978 Camaro Lt 383 L98 HSR Th350(for now) 3:42s
MSII v3 main board rev2.891 8-pin HEI MSD BlasterII
COMP CAMS XR276HR
TRICKFLOW 23° 2.02/1.6
Full roller valvetrain, 11.1:1 compression
Post Reply