Hi all,
I hope there is someone who can help me.
I had a long time working megasquirt ECU, msII, V3.3.
Its on a toyota ae86 with a built 4age+itbs+cams.
The car started bogging on racetrack especially when cornering fast. Then it followed on the straights.
And then I lost all of my ignition, no spark at all.
Ive changed the ignitor modules and the coil aswell, still no spak.
Then I put the stimulator on the ecu and the ignition led is not lighting, so I believe something has burnt/died on the board.
I've bought it working, so I dont know which part belongs to the ignition.
I'd be really happy if someone could tell me where should I start this repair.
Thanks in advance
MsII, v3.3, something died in ignition, plese help
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MsII, v3.3, something died in ignition, plese help
Please describe how the board is set up for ignition output.
