Problem with MSII daughterboard
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Problem with MSII daughterboard
i am building the V3 board with EDIS, this is my 4th one the other 3 i done MSextra with no problems, after built and with mods for EDIS placed an MS!extra chip and tested fine with simulator, but when i place the ms2 chip the fuel pump led just flashes, the MS2 chip has the software 2.920, then i replaced with other MS2 chip loaded with 2.905 and this one makes the fuel injectors led flshes rapidlly for 30 sec or so then quit even if i have no engine pulses from the simulator, any sugestions, thanks for the help
Re: Problem with MSII daughterboard
Have you set the MS type? Fuel Settings - General. This needs to be done between MS1 and MS2.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Re: Problem with MSII daughterboard
with the MS2 chip loaded with 2.905 , it let me open tuner studio and check it and it shows ms2
Re: Problem with MSII daughterboard
thanks trakkies , that was the problem, finally i got it to start,