Hello,
In the mega manual it states that MSII will start your engine quickly and reliably.
Question: How quickly is it supposed to start the engine? My engine takes several sections to catch and start running. It actually sounds like it is cranking faster then the engine wants to go.
Background: 4.3TBI, MSII, V3.0
Will
Quick Start
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
ironwill11
- Helpful Squirter
- Posts: 48
- Joined: Sun Feb 22, 2015 5:14 pm
Quick Start
You do not have the required permissions to view the files attached to this post.
-
kjones6039
- Master Squirter
- Posts: 618
- Joined: Sat Jul 22, 2006 7:02 pm
- Location: Eureka, Nevada USA
- Contact:
Re: Quick Start
Can you post a log of the engine starting?
Ken
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
-
ironwill11
- Helpful Squirter
- Posts: 48
- Joined: Sun Feb 22, 2015 5:14 pm
Re: Quick Start
Sure I didn't think that it really showed that much data.
You do not have the required permissions to view the files attached to this post.
-
ironwill11
- Helpful Squirter
- Posts: 48
- Joined: Sun Feb 22, 2015 5:14 pm
Re: Quick Start
I will get another one tomorrow when I adjust the timing.