MAP Sensor Connector Size?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
MAP Sensor Connector Size?
I'm making a MAP manifold to connect to my intake manifold and want to make it the same size as the MAP sensor on the MS box. I've not yet chosen which system I'll use but I found that all the MS systems use the same MAP sensor. But I can't find any info on the connector size and type. Please help. TIA.
It's just a piece of fairly generic vacuum hose that runs from the MS MAP sensor to a vacuum port on your manifold. I think it's 1/8th inch. I was able to plug it into an existing vacuum port on my car.
Last edited by Jamesl on Sun Jun 26, 2005 11:04 am, edited 1 time in total.
Still no definiite answer after almost a year
Does someone have a definite answer to my question? I'd prefer some degree of certainty rather than "I think it's ..."
Thanks
Thanks