Page 2 of 2
Re: MS-II Downloader v2.00
Posted: Thu Jan 12, 2012 1:32 am
by trakkies
wrongear wrote:The downloader doesn't work; we are all in aggreement.
Why must I be sent to the same site the says "use the downloader" ? ? ? ? ? ? ? ?
If I'm supose to do it manually, how the heck do I do that?
I have no idea how to create an MSQ. I dont even know what that is. We are car guys . . . . . not computer gurus. Please spell it out.
That offer for my wife is still open.
Load MS Download
Click on file - open
Open C32
Copy the S19 file into that.
Highlight it then click on open.
MS Download will now install it to MS
Re: MS-II Downloader v2.00
Posted: Fri Jan 13, 2012 12:50 pm
by wrongear
OK now I'm getting somewhere. I had a little trouble with the C32 reference but after 20 mins or so, I got it.
On the Update Utility I get;
ERROR: Unknown error status response, e=0x2A
Elaspsed time: 0.55 seconds
the port checker says:
COM4 Opened
115200 baud
"xx V2.89 Embedded Code by B&G xx"
Re: MS-II Downloader v2.00
Posted: Fri Jan 13, 2012 2:14 pm
by wrongear
I'm useing a desk top & a lap top. I can't get the loop back test to work on either. the Laptop has a Keyspan USA=19HS and the desk top is a 9 pin straight through.
My squirt does work with the regular sim & tuner studio on all functions except RPM & of course O2 while I'm on the laptop. I assume that means it's communicating properlly. Maybe not.
Re: MS-II Downloader v2.00
Posted: Mon Jan 16, 2012 8:42 am
by Matt Cramer
wrongear wrote:I'm useing a desk top & a lap top. I can't get the loop back test to work on either. the Laptop has a Keyspan USA=19HS and the desk top is a 9 pin straight through.
My squirt does work with the regular sim & tuner studio on all functions except RPM & of course O2 while I'm on the laptop. I assume that means it's communicating properlly. Maybe not.
It appears to be communicating properly - sounds like you need to troubleshoot the RPM input now.