no RPM ms2 v3.0

This forum is for discussing ignition setup, tuning, and troubleshooting for MS-II. Click these links for info on GM's HEI, EDIS, direct coil control, others.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
3tcpower
MegaSquirt Newbie
Posts: 15
Joined: Thu Dec 27, 2007 11:06 am
Location: SLC, Ut
Contact:
Contact 3tcpower

Re: no RPM ms2 v3.0

Post by 3tcpower »

So, did you get rid of the flooded engine and get the injectors set correctly? I have no clue what you will have to do to get those fire hose injectors working, but I imagine someone will.
My car goes put-put
Top
hemilove
Helpful Squirter
Posts: 40
Joined: Mon Sep 30, 2013 11:11 am

Re: no RPM ms2 v3.0

Post by hemilove »

nope not yet but I will keep trying and wont give up till it runs and is fully going on the street. :mrgreen:
Top
Post Reply

Return to “MS-II Ignition Setup, Tuning, and Troubleshooting”