MSefi.com read only forum (Jan.15,2018)

I have a Lincoln V8 for which I am making the wiring harness. The cylinder numbering is 1 thru 4 on the passenger side and 5 thru 8 on the drivers side. The ignition firing order is: 1,3,7,2,6,5,4,8

Is there an optimal way to connect the injectors to the injector driver 1 and 2? Or is something like this OK:

Driver 1: cylinders 1,3,7,2
Driver 2: cylinders 6,5,4,8

or maybe 180 degrees apart:

Dirver 1: cylinders 1,7,6,4
Driver 2: cylinders 3,2,5,8

Thanks in advance,

William

It really doesn't make any difference (I've tried). I ended up with 2 from each bank, on each channel, just to try and minimize possible fuel pulses in the fuel rail.

Brad J.

Brad,

Thank you so very much.

William

No prob...Glad to help William.

Brad J.