MS-2 and GM DIS
Posted: Tue Sep 12, 2006 1:31 pm
The wiring for setting up a GM DIS system for MS-2 is a little confusing. The megamanuel is saying that I can run this system, but if MS-2 can only run 1 coil, I dont see how it can run a DIS system since the smallest DIS is a 2 coil system. I have already purchased my MS-2 system and had a bypass installed into it. Any help on this subject would be greatly apprciated. I have already converted over to an older DIS module with the bypass in it. Thanks.