I am wondering if MS is compatible with this particular coolant temp sensor? I didnt see it listed on. I have the one that is recommended prt # SU109, but it is a bit wider in diameter which would require me to drill the thermostat housing to fit it in.
Just wondering if anybody has used this coolant temp sensor without using easytherm to calibrate it.
The car is an 88 mazda mx6 GT. And this GM coolant temp sensor prt #SU4122 is a direct fit for replacing the factory sensor.
GM coolant temp sensor prt #SU4122 WELLS ???
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
GM coolant temp sensor prt #SU4122 WELLS ???
-Rick-
88' Mazda MX-6 GT A work in progress...
88' Mazda MX-6 GT A work in progress...
Cool. 
I'll look up the specs in a bit. Ill check to tomorrow if it falls within the given parameters. Thanks for your response.
The reason behind using this particular sensor is because that is what is used for the mazda miata for the electromotive TEC. It fits in all Mazda thermostat housings and would make for an easy install.
I'll look up the specs in a bit. Ill check to tomorrow if it falls within the given parameters. Thanks for your response.
The reason behind using this particular sensor is because that is what is used for the mazda miata for the electromotive TEC. It fits in all Mazda thermostat housings and would make for an easy install.
-Rick-
88' Mazda MX-6 GT A work in progress...
88' Mazda MX-6 GT A work in progress...