I am building a new Fuel Rail which is being tapped to accept AN fittings.
I am trying to determine the diameter of the O-Ring Boss at the top of the tap.
This is for both a -4 (Injector Supply) and -8 Fitting (Rail Ends).
Does anyone know where I can find this info anyplace.
Machining Fuel Rail
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
SDConcepts
- MegaSquirt Newbie
- Posts: 4
- Joined: Thu Jul 20, 2006 4:14 am
- Location: warren
- Contact:
whenever i use AN type o-ring fittings i use port spec SAE J1926-1. the o-ring boss for the injector fittings should be machined to .540+.003-.000.
Check out my website:
Http://www.superiordesignconcepts.com
we specialize in custom efi fabrication as well small scale cnc and prototype design.
Http://www.superiordesignconcepts.com
we specialize in custom efi fabrication as well small scale cnc and prototype design.