Page 1 of 1
2006 saturn ion
Posted: Fri Jun 22, 2007 10:59 am
by psykodevul
I own a 2006 saturn ion with the 2.2 ecotec in it and i am wanting to boost it and it has the coil on ignition and returnless fuel now what would i need to change as far as the fuel and spark in order to get it to work with a turbo car? and the stock maf but i think it is just a iac sensor won't work will it what would i have to get or what cars can i rip one from??? thank you
Posted: Fri Jun 22, 2007 1:18 pm
by Minami Kotaro
You'll need an OBD1 GM DIS module to control spark. Don't worry about the MAF, since MS will be using its own MAP sensor (unless you just really want to use MAF). I don't know about the IAC, but all the other stock sensors should work.
Most people setting up Ions for MS add a return to the fuel rail.
Posted: Fri Jun 22, 2007 8:55 pm
by psykodevul
this may sound stupid but i got a v.3 ms and is the map sensor a external part or is it built in? would i have to order it seperately? or is it just wired in.....
Posted: Sat Jun 23, 2007 4:26 am
by Minami Kotaro
this may sound stupid but i got a v.3 ms and is the map sensor a external part or is it built in? would i have to order it seperately? or is it just wired in.....
www.megasquirt.info
Read this before you go any further.
Posted: Wed Jul 25, 2007 11:56 am
by carjbre02
MAP sensor is built in. You'll notice that you need to connect a vacum line from the MAP sensor on the megasquirt V3.0 to the intake manifold vacum connector. It sounds like you got a pre-assembled MS. Did you get any kind of wiring harness for your car? I imagine ecotec wiring harnesses are pretty universal (across basically all GM 4 cylinder made past 02!). Just find someone who megasquirted an ecotec and that'll be a good starting platform. turbos would be a waste of time with your car, they make superchargers for ecotecs in both cobalts and ions so just get that!
Posted: Wed Aug 29, 2007 3:05 pm
by Minami Kotaro
Turbochargers are not a waste of time with any car!