MSefi.com read only forum (Jan.15,2018)

Retrofitted a nissan throttle postion sensor onto my stock throttle body, and need to know where to buy the connector(if I even need it?) pigtail for the TPS. The number on the tps is: 293024

I cut back the outer loom, and there is a white, red, and black wire, what wire means what?

So do I use the connector on the TPS or the wires coming out of the side of it?

Picture:

http://i73.photobucket.com/albums/i211/ ... MG1684.jpg

http://i73.photobucket.com/albums/i211/ ... MG1685.jpg



TIA
Jason

You'll use the connector with the wires coming from the side. I just found my connector from the junkyard ('89 240SX KA24E). I'm not sure how I wired it off the top of my head but there is an easy how-to in the MegaManual for figuring out which wire is which.

240SX KA24DE TPS: