Page 1 of 1
I need 200cc/min injector @ 58psi
Posted: Sun Jan 06, 2008 7:53 am
by MikeManer
Can anyone give me an OEM application that might use an injector as described above? Thank you for any help.
Mike
Posted: Fri Feb 01, 2008 5:19 am
by Krita
toyota corollas from 4A-FE engine late 80's early 90's had about 195cc's if the set i have here are right but yeah at 43psi
i thinkthe 2.0L bmw's had about 150cc/min @ 43psi
have a look at
http://users.erols.com/srweiss/tableifc.htm
shouldn't have an issue finding part numbers here
enjoy
Posted: Fri Feb 01, 2008 6:19 am
by MikeManer
Thank you for the help.
Mike
Posted: Thu Mar 20, 2008 9:13 pm
by abustiffy
MANY v8 ford are a high impedance bosh 19#/hr. THe older ones are the yellow top. I couldnt tell you off hand for others.
Posted: Sat Mar 22, 2008 5:25 am
by MikeManer
Thank you for the reply. I did in fact choose 19# injectors from a Mustang. Thanks again.
Mike