Ignition and VRsens. sheilding

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
toon1
MegaSquirt Newbie
Posts: 26
Joined: Tue Oct 17, 2006 9:39 am
Location: CA

Ignition and VRsens. sheilding

Post by toon1 »

I have both VR sens. wires running through a braided sheild.
I am also running direct coil control and both of those wires are run the same way, together, inside a second braided shield seperate from the VR sens.

Should I only run one of those wires per run inside the braid so they are isoated form eachother?

I can provide pics. if needed.

Thank's, Keith
MS1 V3.0 MS&S Extra
Porsche 914 1.7
Top
preludefan
MegaSquirt Newbie
Posts: 10
Joined: Mon Apr 30, 2007 12:08 am

Post by preludefan »

im looking at my stock honda loom and it has the two vr wires together inside each braid so i guess you need to have one braid per sensor,not one braid per wire
Top
Post Reply

Return to “Wiring and Sensors”