VW Toothed wheel set-up

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Ian Thompson
MegaSquirt Newbie
Posts: 5
Joined: Tue Jan 09, 2007 2:33 pm
Location: Northern Ireland

VW Toothed wheel set-up

Post by Ian Thompson »

Does anybody know what tooth VW put their VR sensor at on their 1.8 turbo petrol engines? I know it is a 60-2 wheel.

Thanks, Ian
Top
Mk1rocco
Helpful Squirter
Posts: 52
Joined: Mon May 17, 2004 7:16 pm

Post by Mk1rocco »

IIRC, it's the 14th tooth.
Top
Ian Thompson
MegaSquirt Newbie
Posts: 5
Joined: Tue Jan 09, 2007 2:33 pm
Location: Northern Ireland

Post by Ian Thompson »

Cheers buddy
Top
Ian Thompson
MegaSquirt Newbie
Posts: 5
Joined: Tue Jan 09, 2007 2:33 pm
Location: Northern Ireland

Post by Ian Thompson »

No, unfortunately 14 isn't correct, anyone else care to try a guess?

Ian
Top
vdubs4life
MegaSquirt Newbie
Posts: 1
Joined: Mon Apr 21, 2008 7:21 am

Re: VW Toothed wheel set-up

Post by vdubs4life »

On my ABA that I am wiring up it's either the 13th or 14th tooth. as near as i can tell tdc on #1 is the gap between. the 1.8 should be the same.
Top
Post Reply

Return to “Wiring and Sensors”