Tuning help on BMW E36 M3 /Alpha N

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
MR.E36i
MegaSquirt Newbie
Posts: 2
Joined: Sun Apr 27, 2008 2:31 am

Tuning help on BMW E36 M3 /Alpha N

Post by MR.E36i »

bimmers need tune help

--------------------------------------------------------------------------------

Hi every one

i own 95 bmw E36 M3 OBDI
and i recently have done some modefication to the engine
i have installed sunbelt race cam, dual springs,titanum retainers, and now i have add S50 Euro ITB's with Intake , port and polish head,
stock buttom ,26Lp injectors

i have installed Megasqurit Runing fuel only for tuning
but i have faced some problem with tuning (on load )

am looking for a tuner that can help me with my application !!!!!

any advice/help/base map that i can start with/contact number of any expert tuner / any freind that with same modes i can talk to

Note:- i am located overseas


Regards,
MR.E36i
MegaSquirt Newbie
Posts: 2
Joined: Sun Apr 27, 2008 2:31 am

Re: Tuning help on BMW E36 M3 /Alpha N

Post by MR.E36i »

any MS Expert here can do me a remot tune :shock: :shock:
devastator
Experienced Squirter
Posts: 333
Joined: Mon Feb 11, 2008 10:19 am
Location: Kinda near Tucson Arizona

Re: Tuning help on BMW E36 M3 /Alpha N

Post by devastator »

There are several people here that will try to help you, but you need to post a problem that you are having first. Also, it helps to know what code version you are using as well as posting a datalog and even an MSQ. There are many people using MS "overseas" so you may need to be a little more specific as to your location.
Sandrail-ACVW 2276 cc, Turbo
MS-II W/spark burning E85
The sand must be punished. :twisted:
Post Reply