MSefi.com read only forum (Jan.15,2018)

Hello:
Suddenly to left of working afterstar and warnu, in estimulador if it works.
Verified tps and and turned to calibrating for if it was the problem but not to served you are welcome.
Other one asks, the priming pulse in order that it serves exactly, I do not understand very well the translation of the manual.
Thank you in advance.

Forget, I work with ms2 v3 and code 2883.

and tried to boot all day without success, afterstar if it works but it seems as if it were not triggered either, as if it never reaches rpm to 300 active and when it does not drop in DATALOG. megatune in turns afterstar but it turns off right away.
started well before but I am beginning and we have to improve many things, but suddenly stopped functioning after putting c 12 and a filter to remove noise in 12v rpm, then it started and began to fail and will not start.
and removed spark plugs and make, and removed injectors and injected, and tested with other seda and anything.
DATALOG on whether there rpm and all the sensors are fine, in addition to the stimulating if it works well, I am starting from 0, code in MS2 and megatune from 0 to provide, any suggestions.