My brain Hurts!! I need to do some tuning ( I will need some help), but it's alive!
It's alive! 4.3 toyota swap
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
It's alive! 4.3 toyota swap
I fired it up today. '98 4.3 vortec with a mercruiser multiport intake, edis 6 running the MSII 3.57 / v 2.8 with the relay box swapped into a '85 4runner.
My brain Hurts!! I need to do some tuning ( I will need some help), but it's alive!
My brain Hurts!! I need to do some tuning ( I will need some help), but it's alive!
Re: It's alive! 4.3 toyota swap
nice work. 
i saw your original post when you found your manifold, and was hoping you would see this through. looks like a very nice install.
i saw your original post when you found your manifold, and was hoping you would see this through. looks like a very nice install.
__________________________
Sequencer (beta) accumulating miles on E12 M90 635csi
& Squirted Pontiac Bubbletop
Sequencer (beta) accumulating miles on E12 M90 635csi
& Squirted Pontiac Bubbletop
Re: It's alive! 4.3 toyota swap
Thanks TM,TheMonkey wrote:nice work.
i saw your original post when you found your manifold, and was hoping you would see this through. looks like a very nice install.
I went with the LC-1 wideband 02 as well so I think this swap is going to be sweet, Its not really even close to tuned and it already sounds mean!