Flex Fuel Sensor Question

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
underpsi68
MegaSquirt Newbie
Posts: 2
Joined: Wed Mar 25, 2009 2:05 pm

Flex Fuel Sensor Question

Post by underpsi68 »

HI All,

Can anyone tell me if the GM Flex Fuel sensor when used with MS2 makes fueling corrections by fuel temp? I noticed that the sensor has outouts for % ethanol (which I can understand) and also an output for fuel temp. What does the ECU do with the fuel temp? Does it make any corrections for it?

Any help would be appreciated. :)
Top
karlo
MegaSquirt Newbie
Posts: 3
Joined: Wed Jul 21, 2004 2:38 pm
Location: Oslo, Norway

Re: Flex Fuel Sensor Question

Post by karlo »

Fuel temp is not recorded and used for anything. At least yet.
Top
underpsi68
MegaSquirt Newbie
Posts: 2
Joined: Wed Mar 25, 2009 2:05 pm

Re: Flex Fuel Sensor Question

Post by underpsi68 »

Thanks for the info.
Top
Post Reply

Return to “Tuning Fuel and Air”