Page 1 of 1
VR Sensor Orientation with EDIS
Posted: Wed Apr 01, 2009 6:44 pm
by IMPerative
My VR sensor is sourced from an English vehicle. It is the type that has the connector plug at 45 deg to the sensor body. Given that the sensor is magnetic and presumably has N and S poles, is there a preferred orientation to the trigger wheel.
Re: VR Sensor Orientation with EDIS
Posted: Thu Apr 02, 2009 8:02 pm
by BottleFed70
I think you are getting confused with the orientation of the poles. Stick the sensor to a piece of steel to see. There is only 1 pole at the end of the sensor, the other pole is encased in plastic. It's not possible to orientate it "backwards" in this regard.
Re: VR Sensor Orientation with EDIS
Posted: Mon Apr 06, 2009 8:33 am
by IMPerative
Thanks for that.